Showing all 4 results
Filter-
Linear Move Irrigation System
Four-wheel Lateral Sprinkler
The appearance of the four-wheel lateral sprinkler is similar to that of the two-wheel lateral sprinkler. It is supported by a dozen towers and a long spray branch pipe. It is more suitable for relatively flat plots.-
- 1.Main water pipe diameter: 141㎜, 168㎜, 203㎜
- 2.Cantilever pipe: 141mm x 13.4m
- 3. Power: 4-11KW
- 4. Standard type per span: 168mmx 54.5m
- 5.Motor power: 0.5kW–1kW
- 6.Electric transmission gearbox speed: 40:1
- 7.Horizontal tire turbine reducer: 50:1
-
-
Linear Move Irrigation System
Rotor Type Sprinkler
Rotary wing sprinkler is a kind of small sprinkler equipment, which has the characteristics of high efficiency, saving time and low labor cost. The device mainly generates a reaction force by bending the end of the rotating arm to a certain Angle, thereby driving the rotating arm to rotate, while the lower end of the rotating arm moves through the rotating ring.-
- 1. Spraying machine flow: 15-55 square
- 2.Inlet pressure: 2kg-6kg
- 3. Irrigation width: 30m-50m
- 4.Running length: 250m-400m
- 5.Recovery speed: 0.3m-2.2m per minute
- 6.Cantilever length: 8.5m
- 7.rotating diameter: 17m
- 8.Ground clearance height: 50cm
- 9.Drag pipe diameter: 90mm
- 10.Delivery time: 15-20 days
-
-
Linear Move Irrigation System
Two-wheeled Lateral Sprinkler
The running track of the two-wheeled lateral sprinkler is parallel movement. The center point and all spans move parallel to each other. The water flows from the center point through the sprinklers evenly distributed on the fuselage to irrigate the ground.-
- 1.Main water pipe: 168mm*3mm wall thickness
- 2.Cantilever pipe: 141mm x 13.4m
- 3.Power: 4-11KW
- 4.Standard type per span: 168mmx 54.5m
- 5.Motor power: 0.5kW-1kW
- 6.Electric transmission gearbox speed: 40:1
- 7.Horizontal tire turbine reducer: 50:1
-
-
Linear Move Irrigation System
Wheelmove Sprinkler
The Wheelmove Sprinkler is a large semi-automatic irrigation equipment with the advantages of good wind resistance, medium inlet pressure, water and energy saving, simple operation, and no dead angle of sprinkler irrigation. It is widely used in water-saving sprinkler irrigation projects in large farmlands, especially long fields.-
- 1.Nominal diameter of pipe: 4 inches, 5 inches
- 2.Nozzle flow: 0.95~3.0m³/h
- 3.Pressure at nozzle: 0.2~0.4Mpa
- 4.Equipment passing height: 0.75m/0.97m/1.13m/1.45m
- 5.Wheel diameter: φ1.47m, φ1.93m, φ2.25m, φ2.9m
- 6.Irrigation intensity: 4.5~17.1mm/h
- 7.Climbing ability:≤20 degrees
-



