Showing all 4 results
Filter-
Sprinkler Irrigation Systems
360 Degree Rotating Sprinkler
The working principle of the 360-degree rotating sprinkler is achieved through the power of water flow. The water flow will drive the rotating nozzle to achieve 360-degree rotation, which can realize irrigation work in both fast and slow modes.-
- 1.Material: ABS plastic + PP plastic
- 2.Working mode: hydraulic drive
- 3.Interface size: ISO, EN, ASTM standard pipe
- 4.Spraying diameter: about 0-10 meters
- 5.Applicable scenarios: garden spraying, roof sprinkling, lawn irrigation, vegetable field watering, etc.
-
-
Sprinkler Irrigation Systems
Atomizing Sprinkler
Atomizing sprinkler disperse liquid into small droplets to form a uniform mist spray, achieving uniform spraying or atomization of liquid. They are widely used in irrigation, fertilization, insecticide, etc.-
- 1.Droplet size: 15-60 microns
- 2.Water flow rate: 10 -40 L/hr
- 3.Sprinkler diameter: 0.3-1 meter
- 4.Working pressure: 0.3-0.7 Mpa
-
-
Sprinkler Irrigation Systems
Large Reel Sprinkler
Large reel sprinkler is an irrigation equipment that can realize water-saving irrigation of large areas of farmland through reel sprinkler. This equipment uses water pressure to rotate the winch through the water turbine, gearbox and transmission system, thereby pulling the sprinkler vehicle to move and spray automatically, and can irrigate large areas of farmland. -
- 1.PE pipe diameter: 100~125mm
- 2.Nozzle working pressure: 0.5-0.8MPa
- 3.Nozzle diameter: 28-36mm
- 4.Range 55-72m
- 5.Spraying width:: 95-124m
- 6.Sprinkler vehicle height: 1300-1500mm
- 7.Ground clearance: 300mm
-
-
Sprinkler Irrigation Systems
Sprinkler pipe machine
Sprinkler pipe machine refers to a sprinkler system whose power source, water pump, main pipe, branch pipe and sprinkler nozzle are all movable. Sprinkler pipe machine can be moved to different areas for use after each irrigation. It mainly relies on manual transfer to the new sprinkler site, and the equipment investment is low.-
- 1.Working pressure: 0.25-0.5 Kpa
- 2.Pump Lift: 30-65 meters
- 3.Sprinkler radius: 15-40 meters
- 4.Flow rate: 10-80 m³/h
-



